Concrete vs. Paver Driveway Cleaning: What's the Difference?

Both concrete and paver driveways get dirty in Florida — algae, dirt, tire marks, and oil are equal-opportunity offenders. But the two surfaces are built differently, so they're cleaned differently. Here's what to know about each.

Cleaning a Concrete Driveway

Concrete is a single poured slab, so it stands up to a flat-surface cleaner that scrubs the whole area evenly for a streak-free finish. We treat organic growth and dirt, then detail the edges by hand. Oil spots and rust can be handled as add-on treatments.

At Pressure Wash Boss, concrete driveways (including the connected sidewalk and walkway) start at $100 up to 800 sq ft and scale up with size — see our driveway cleaning page or get an instant estimate.

Cleaning a Paver Driveway

Pavers are individual units set in sand, which calls for more care. Too much pressure in the wrong spot can blast out the joint sand that locks the pavers together. We clean pavers at a controlled pressure that lifts the grime without disturbing the base.

Because of the extra care involved, paver driveways are priced at 15¢ per square foot.

Should You Reseal After Cleaning?

Pavers especially benefit from re-sanding the joints and sealing after a deep clean — it locks everything in place and slows future algae growth. Concrete can be sealed too, which makes future cleanings easier. Ask us what makes sense for your driveway.

Why Florida Driveways Get Dirty So Fast

Our humidity and frequent rain feed algae that takes hold in the porous surface of concrete and the joints of pavers. That green or black film isn't just ugly — it's slippery. We explain the science in how to remove algae from your driveway.

Not sure which surface you have or what it'll cost? Send us a photo through our contact form and we'll sort it out.

← Back to all articles